This item has been discontinued.
Wood and Tile Natural Pet Odor Eliminator and Cleaner 14 Ounces
Long-Term Backorder, Will Ship when Available
Cleans and permanently removes odors from urine, pet spary, feces and vomit from wood and tile surfaces. Made entirely from non-toxic botanicals, this is safe for pets, people and the environment.
Odor Eliminator, Cleaner and Stain Remover
•Natural wood floors
•Wood veneer floors
•Floor trim & baseboards
Powerful and Effective
Professional strength. Used by pet and cleaning professionals. Exclusive Patented Encapsulation Technology and Advanced Eliminator Formula.
Purified water, cane sugar derivatives, a proprietary blend of botanical extracts, hydrated cellulose (plant-based cleaning agents) and a natural propellant - nitrogen.
Quick and Easy
Works on contact. Just spray - no need to soak, scrub or rinse.
Safe and Eco Friendly
Safe on all water-safe surfaces. Environmentally Responsible Formulation: non-toxic, non-flammable, non-corrosive, non-carcinogenic, biodegradable and natural propellant.
Directions: Shake can before spraying. Remove excess urine, cat spray, feces, hairballs or vomit first.
Floors (Wood, tile and linoleum. For carpet and grout, use CLEAN + GREEN® CARPET & UPHOLSTERY.)
1. Spray affected areas. Hard floor surfaces may become slick, so wipe dry with clean rag or allow to air dry. (Be careful while walking on wet floors!)
2. Sniff to check that entire affected area has been sprayed.
Floor Trim and Baseboards
1. Spray affected areas. 2. Wipe dry with clean cloth. Walls
1. Test for color fastness on hidden area.
2. Spray on affected surface.
3. Allow product to air dry or rub into surface with clean cloth.
No need to soak or scrub. Just make sure product comes in contact with prob lem source.
Careful: Spraying the can at an angle greater than 60° may release all the propellant and cause can to stop spraying
Walls and Woodwork
Application on walls and woodwork is dependent upon the degree of saturation in the wood. The only requirement for CLEAN+GREEN for Wood/Tile or Multipurpose Mist to work is that the product must come in contact with the odor source. Once it has made contact, it will encapsulate the odor source and eliminate the odor.
Spray CLEAN+GREEN for Wood and Tile directly on the affected area. For added benefits, rub the affected area with a clean rag to increase the penetration of the spray onto surface (e.g. wood, wall, etc.) Allow area to dry, and check to see if odor is completely gone. If odor is not completely gone, the spray may not have come in contact with all of the odor source. Reapply the spray to the area that still has an odor, following all of the directions above.
Note: Wood and wall surfaces are porous and naturally soak up liquids; CLEAN+GREEN will pull the odor source out of the wood and wall with each application, until it is completely gone.
Write a Review
Have you tried Clean and Green Wood and Tile Natural Pet Odor Eliminator and Cleaner? Share your experience with others; Review this product here!